包装泄露试验性能测试仪 CXL0681-D
English name：Package leakage test performance tester
Model： CXL0681-D
Product brand：
远梓
适用方向：针对包装产品密闭测试端加装冒泡法的物理装置来验证气压泄漏的大小。
Application direction: A physical device with bubbling method is installed on the closed test end of the packaged product to verify the size of the air pressure leak..
仪器特点
采用7英寸K600+内核/点阵式65色 800*480分辨率触摸屏显示，PLC控制系统动态显示加载力值；操作界面可选：中文/英文/中英文切换；数字闭环控制。触控操作显示屏进行选择，并可由机载打印机打印出测试结果。
Using 7-inch K600+ core/dot-matrix 65 color 800*480 resolution touch screen display, PLC control system dynamically displays the loading force value; Operation interface Optional: Chinese/English/English switch; Digital closed loop control. The touch-operated display makes the selection and the test results can be printed by the on-board printer.
仪器参数
测试参数与要求：
1、针阀手柄通过密封硅胶件，贯穿插入套管内和测试用进气压组件保持隔离距离，接插好进气组件和
检测工装紧固。
2、启动检测程序，正气压在0～10K P a 可调范围内,精度为：±1%，分辨率：0.01KPa
预调好测试气压,此时设备因恒压输气,平缓的抽
离针阀手柄,在针阀手柄和膜片位移过程中不能有泄漏气压的现象。
3、当针阀手柄和密封膜片分离瞬间，正压会突然下降（此时设备能设置延时正压输出，停止输出2 S后再有）,膜片和套管腔体从导通到闭合过程要有时间,因膜片是弹性体自闭合结
构,当闭合有效时正压就能保持住。如闭合不良则会有气压泄漏，仪器有数值显示（可以设置轻微泄漏的上、下限值来判定产品的测试状态合格或不良）。
4、在产品密闭测试端加装冒泡法的物理装置来验证气压泄漏的大小。
执行标准：YY/T1710-2020附录A的要求研制。
发货清单：主机1台、有机玻璃水槽、合格证1份、操作说明书1份、打印纸1卷
电源：AC90V-240V/50Hz
数据保存：机载针式打印机/可U盘导入电脑存储
净重：15kg 外形尺寸：300×240×240（mm）
服务：可定制非标仪器
仪器终身免费依国家标准规定升级服务、终身维护
Test parameters and requirements:
1, the needle valve handle through the sealed silicone parts, inserted into the casing and test air inlet pressure assembly to maintain an isolated distance, plug in the air inlet assembly and
Check that the tooling is tight.
2, start the detection program, positive gas pressure in the adjustable range of 0 ~ 10KPa, accuracy: ±1%, resolution: 0.01KPa
The test air pressure is pre-adjusted, and the equipment is pumped gently due to constant pressure gas transmission
When the needle valve handle is removed, there should be no leakage of air pressure during the displacement of the needle valve handle and the diaphragm.
3. When the needle valve handle and the sealing diaphragm are separated, the positive pressure will suddenly drop (at this time, the device can set the delayed positive pressure output, and it will be repeated after 2 S of stopping the output), and the diaphragm and sleeve cavity should have time from conduction to closure, because the diaphragm is an elastomer self-closing junction
The positive pressure can be maintained when the closure is effective. If the closure is poor, there will be pressure leakage, and the instrument has a numerical display (the upper and lower limits of slight leakage can be set to determine the test status of the product is qualified or poor).
4. A bubbling physical device is installed at the closed test end of the product to verify the size of the air pressure leakage.
Implementation standard: YY/T1710-2020 Appendix A requirements development.
Delivery list: 1 host, plexiglass sink, 1 certificate, 1 operating manual, 1 roll of printing paper
Power supply: AC90V-240V/50Hz
Data storage: on-board needle printer/U disk can be imported into the computer storage
Net weight: 15kg Dimensions: 300×240×240 (mm)
Services: Customizable non-standard instruments
Instrument lifetime free of charge in accordance with national standards for upgrading services, lifelong maintenance
售后服务
整机质保壹年
上门培训维修
七天质量问题全款退换货服务
仪器软件终身免费依国家标准规定升级服务、终身维护
The whole machine quality guarantee one year
door-to-door training maintenance
seven days quality problem full-money return service
instrument software life-long free according to the national standard upgrade service, life-long maintenance
