仪器特点
采用7英寸K600+内核/点阵式65色 800*480分辨率触摸屏显示，PLC控制系统动态显示加载力值；操作界面可选：中文/英文/中英文切换；数字闭环控制，AD采集速度为500KHz，内码50万；高精度时钟芯片，断电存储；过载报警停机保护；触控操作：选择公称规格、设定载荷、最大挠度、打印设定、测试、上行、下行、时间、标定，测试完成后并由机载打印机打印测试结果。
Using 7-inch K600+ core/dot-matrix 65 color 800*480 resolution touch screen display, PLC control system dynamically displays the loading force value; Operation interface Optional: Chinese/English/English switch; Digital closed loop control, AD acquisition speed is 500KHz, internal code is 500000; High precision clock chip, power off storage; Overload alarm stop protection; Touch operation: Select nominal specification, set load, maximum deflection, print setting, test, up, down, time, calibration, and test results are printed by the on-board printer after the test is completed.
仪器参数
执行标准：YY0489-2004附录B标准
公称规格：客户提供
试验平板：100平方毫米，表面加载10kg的载荷，变形不得超过0.1mm
冲击高度：700mm
负压检测：-10～-90Kpa误差不大于±1%;
测试时间：1S～999s任意设定，（测量系统负压保持5分钟内不漂移±0.5Kpa）
打 印：每次可打印8次、10次测试数据或13次测试数据及平均值和偏差值。
发货清单：主机1台、合格证1份、操作说明书1份、打印纸1卷
电源：AC90V-240V/50Hz
数据保存：机载针式打印机/可U盘导入电脑存储
净重：12 kg 外形尺寸：300×240×240（mm）
服务：可定制非标仪器
仪器终身免费依国家标准规定升级服务、终身维护
Implementation standard: YY0489-2004 Appendix B standard
Nominal specifications: Customer provided
Test plate: 100 square mm, surface loading 10kg load, deformation shall not exceed 0.1mm
Impact height: 700mm
Negative pressure detection: -10 ~ -90Kpa error is not more than ±1%;
Test time: 1S ~ 999s arbitrary setting, (the negative pressure of the measuring system does not drift ±0.5Kpa within 5 minutes)
Printing: Each time can print 8 times, 10 times or 13 times test data and average and deviation values.
Delivery list: 1 host, 1 certificate, 1 operating manual, 1 roll of printing paper
Power supply: AC90V-240V/50Hz
Data storage: on-board needle printer/U disk can be imported into the computer storage
Net weight: 12 kg Dimensions: 300×240×240 (mm)
Services: Customizable non-standard instruments
Instrument lifetime free of charge in accordance with national standards for upgrading services, lifelong maintenance
售后服务
整机质保壹年
上门培训维修
七天质量问题全款退换货服务
仪器软件终身免费依国家标准规定升级服务、终身维护
The whole machine quality guarantee one year
door-to-door training maintenance
seven days quality problem full-money return service
instrument software life-long free according to the national standard upgrade service, life-long maintenance
