医用口罩合成血液穿透测试仪XYST19083-A
English name：Medical mask synthetic blood penetration tester
Model：XYST19083-A
Product brand：
远梓
适用方向：特制的定压喷射装置，可以在控制的时间内喷射一定体积的合成血液穿透试验
Application direction: The special constant pressure injection device can spray a certain volume of synthetic blood penetration test in a controlled time
所属分类：
仪器特点
采用7英寸PLC多彩液晶触摸屏，中文菜单显示，配有高精度压力传感器，AD采集速度为500KHz，内码50万；高精度时钟芯片，断电存储；PLC控制动态显示加载力值；过载报警停机保护,，可打印测试数据，凸出形的样品固定装置，能够模拟口罩的实际使用状态，留出试验靶区，且不破坏试样，并且使合成血分布在样品的靶区；特制的定压喷射装置，可以在控制的时间内喷射一定体积的合成血；特制的定压喷射装置，可以在控制的时间内喷射一定体积的合成血；以挡掉喷射的液体流的高压沿部分，只让稳态流部分喷射到样品上，增大了喷射到样品上的液体速度的准确性和重复性，公称规格、测试、时间、标定等。
7-inch PLC colorful LCD touch screen, Chinese menu display, equipped with high-precision pressure sensor, AD acquisition speed of 500KHz, internal code of 500,000; High precision clock chip, power off storage; PLC control dynamic display loading force value; Overload alarm shutdown protection, can print test data, convex sample fixing device, can simulate the actual use of the mask, leave the test target area, and do not destroy the sample, and make the synthetic blood distributed in the sample target area; The special constant pressure injection device can spray a certain volume of synthetic blood in a controlled time; The special constant pressure injection device can spray a certain volume of synthetic blood in a controlled time; In order to block the high-pressure part of the jet liquid flow, only the steady flow part is sprayed onto the sample, which increases the accuracy and repeatability of the liquid velocity sprayed onto the sample, nominal specification, test, time, calibration, etc.
仪器参数
完全符合标准YY 0469-2011 《医用外科口罩技术要求》中4.6中要求规定设计。
1.喷射距离：300mm～305mm可调，误差不大于±1mm；
2.喷口直径：0.84mm；误差不大于±0.02mm；
3.喷口长度：12.7mm；误差不大于±0.2mm；
4.喷射速度：450cm/s，550cm/s，635cm/s；
5.喷射压力：10.6 kPa（80 mmHg），16 kPa（120 mmHg），21.3 kPa（160 mmHg）。
6、净重：50Kg
Fully comply with standard YY 0469-2011 "Technical requirements for Medical Surgical Masks" in 4.6 requirements of the design.
1. Spray distance: 300mm ~ 305mm adjustable, error is not more than ±1mm;
2. Nozzle diameter: 0.84mm; The error is not more than ±0.02mm;
3. Nozzle length: 12.7mm; The error is not more than ±0.2mm;
4. Injection speed: 450cm/s, 550cm/s, 635cm/s;
5. Injection pressure: 10.6 kPa (80 mmHg), 16 kPa (120 mmHg), 21.3kPa (160 mmHg).
6. Net weight: 50Kg
售后服务
整机质保壹年
上门培训维修
七天质量问题全款退换货服务
仪器软件终身免费依国家标准规定升级服务、终身维护
The whole machine quality guarantee one year
door-to-door training maintenance
seven days quality problem full-money return service
instrument software life-long free according to the national standard upgrade service, life-long maintenance
