医用拔牙钳牢固度测试仪 YY8666-LGD
English name：Firmness tester for medical tooth extraction forceps
Model：YY8666-LGD
Product brand：
远梓
适用方向：可测能适应多种医用拔牙钳牢固度的测试
Application direction: Can be measured to adapt to a variety of medical tooth extraction forceps firmness test
所属分类：
仪器特点
采用7英寸K600+内核/点阵式65色 800*480分辨率触摸屏显示，PLC控制系统动态显示加载力值；操作界面可选：中文/英文/中英文切换；采用数字闭环控制，AD采集速度为500KHz,内码100万；高精度时钟芯片，断电存储；PLC控制动态显示加载力值；过载报警停机保护。
触控操作：公称规格、施加载荷、试验时间、测试次数、上行、下行、时间、标定。由触控操作液晶显示屏上的菜单，机载打印测试数据。实时显示实际施加载荷及试验时间，有设定值保持测试与破坏性拉脱测试2种实验方法。能适应多种医用拔牙钳牢固度的测试
Using 7-inch K600+ core/dot-matrix 65 color 800*480 resolution touch screen display, PLC control system dynamically displays the loading force value; Operation interface Optional: Chinese/English/English switch; Adopts digital closed-loop control, AD acquisition speed is 500KHz, internal code 1 million; High precision clock chip, power off storage; PLC control dynamic display loading force value; Overload alarm stop protection.
Touch operation: nominal specification, applied load, test time, test number, up, down, time, calibration. The menu on the LCD screen is operated by touch control, and the test data is printed on-board. The actual applied load and test time are displayed in real time. There are two experimental methods: set-point holding test and destructive pull-out test. Can adapt to a variety of medical tooth extraction forceps firmness test
仪器参数
执行标准：YY0194-1994的规定。GB2766-2006标准规定。
执行标准：有关标准的规定
载荷设定范围：0~250N 误差不大于±1%，分辨率：0.01N
移动速度：10 mm/min
保持时间：0~999s 误差不大于1s
打印方式：单次试验力与保持时间数据及10次测试数据及平均值和偏差值 发货清单：主机1台、夹具一套、合格证、操作说明书1份、打印纸1卷，砝码一套。
电源：AC90V-240V/50Hz
数据保存：机载针式打印机/可U盘导入电脑存储
净重：15kg 外形尺寸：400×260×240（mm）
服务：可定制非标仪器
仪器终身免费依国家标准规定升级服务、终身维护
Implementation standard: YY0194-1994 provisions. GB2766-2006 standard.
Implementation standards: Provisions relating to standards
Load setting range: 0~250N error is not more than ±1%, resolution: 0.01N
Moving speed: 10 mm/min
Hold time: 0~999s error is not more than 1s
Printing method: single test force and holding time data and 10 test data and average and deviation value Delivery list: 1 host, 1 fixture, certificate, 1 operating manual, 1 roll of printing paper, 1 set of weights.
Power supply: AC90V-240V/50Hz
Data storage: on-board needle printer/U disk can be imported into the computer storage
Net weight: 15kg Dimensions: 400×260×240 (mm)
Services: Customizable non-standard instruments
Instrument lifetime free of charge in accordance with national standards for upgrading services, lifelong maintenance
售后服务
整机质保壹年
上门培训维修
七天质量问题全款退换货服务
仪器软件终身免费依国家标准规定升级服务、终身维护
The whole machine quality guarantee one year
door-to-door training maintenance
seven days quality problem full-money return service
instrument software life-long free according to the national standard upgrade service, life-long maintenance
